Categories
Clíodhna My Designs Overdrive

Clíodhna – Building the Pedal

The circuit design is finalized, it’s time to build the pedal. If you want to see previous parts just follow these links. Here, I’ll be covering building the pedal. You can jump to schematic just below, or the board diagram. There’s also the final bill of material. There’s a bit on what I did for […]

Categories
Clíodhna My Designs Overdrive

Clíodhna – Finalizing the Circuit Design

Let’s finish the circuit design today. The first and the second part went pretty well, I also covered tone control for the pedal. Let’s add couple more options and then finalize the design with actual switches I’ll be using. You can jump to schematic which is just below, or to the finalized circuit schematic. I […]

Categories
Clíodhna My Designs Overdrive

Clíodhna – Tone Control

So far so good 😊. The first and the second part went pretty well. Let’s plough on. In this post I’ll cover tone control. The previous parts were dealing with clipping section – clipping and frequency response shaping. I conveniently omitted tone section. Now it’s time to add the tone stage. You can jump to […]

Categories
Clíodhna My Designs Overdrive

Clíodhna – Super Screamer Pt2

I think that the first part went pretty well. Let’s continue designing our own DIY overdrive pedal. In this post I’ll cover various clipping options. The previous part was dealing with clipping section too, but it was covering frequency response shaping. This one will cover the actual clipping. You can jump to schematic, or breadboard […]

Categories
Clíodhna My Designs Overdrive

Design Our Own Super Screamer Like Pedal

After covering a lot of ground around Tube Screamer like pedals, I think it’s right time to try our hand at doing some super mod heavy design of our own pedal. In several steps I’ll try to design some DIY overdrive pedal that will have all the character of a Tube Screamer but with much […]